I loved the idea of a kit to save what could turn into multiple trips to the hardware store to install my EasyStart Flex. The instructions were spectacular, but the kit was disappointing. Some of the fittings are suitable for 14 AWG (maybe 13 AWG) but do not fit 10 or 12 AWG wire. There was a female spade terminal fitting and a male spade terminal fitting for 10/12 AWG wire, but no butt splices, ring, or fork terminal fittings that fit 10/12 AWG. My install required: 1 female spade terminal fitting for the contactor (black wire, smaller as I recall, could use the smaller 14 AWG fittings), one butt splice (brown wire, needed 10/12 AWG), one fork/ring terminal fitting for the other side of the contactor (white wire, needed 10/12 AWG), and a larger female spade terminal fitting for the H terminal on the run capactior (orange wire, 10/12 AWG). Thankfully I had a box of 10/12 AWG butt splices and fork fittings, or I would not have been able to complete my install without a trip to the hardware store.

Installation instructions state you may need a fork terminal, this installation kit should have included one. The included ring terminals are not large enough for wire gauge.

It would be nice if the kit had labeled which connector was appropriate for what wire of the 4 on the MicroStart. It also would have been nice if it had included some instructions, for example, of where to cut the red wire to then use a (not included) barrel splicer or wire nut instead of having to remove the wire and reconnect another. Someone on the forum posted that idea after I had already cut the fork connector at the end instead of splicing it like that. A lot of extra parts with no apparent use for them.

Kit was a big help. Zip ties and weatherproof fittings all helped. Kit was missing a yellow button connector, and they substituted an orange thingy that just did not work, kept pulling loose. I got a butt connector and all worked perfect. Thanks!

Made the installation process easy.

Everything I needed to install the Esaystart in one kit. Avoided multiple trips to the hardware store.

The installation kit provided all the necessary connectors for installing the EasyStart unit, which by the way, works very nicely on Utility Power, and my 240V, 50 amp generator.